Xisom RO Membrane + CSM80 + Housing Used In All Type Of RO Water Purifier

Description: Xisom RO Membrane + CSM80 + Housing Used In All Type Of  RO  Water Purifier.

CSM 80 DESCRIPTION:CSM RE-1812-80 Thin-Film Composite (TFC) RO Membrane.

This is supreme quality Membrane made in USA. This is the best Membrane offering high performance.

This membrane is tested and certified under NSF / ANSI Standard 58 for material requirement.

CSM TFC Reverse Osmosis Membranes are made of the good quality spiral-wound Polyamide and offer outstanding pollutant rejection at water pressures up to 125 psi. You can use till 3 years intervals or sooner only if TDS levels increase beyond normal levels. 80 GPD (Gallons Per Day) production capacity. Standard size fits most 4 and 5 stage residential RO systems with flow restrictions rated at 80 gallons per day.   

Flow Rates and Production Capacity:

All reverse osmosis (RO) membranes are carefully matched to achieve a certain flow-rate of permeate (treated) water consistent with the overall design of the RO system. This deliberate matching of design increases the efficiency and effectiveness of the contaminant rejection of the membrane along with optimizing the amount of reject water necessary to clean the membrane during normal everyday use.

Specifications:

Membrane Type: Thin-Film Composite (TFC)

Diameter: 1.8”.

​Membrane Material: Polyamide (PA)

Element Configuration: Spiral Wound

Maximum Operating Pressure: 125 psi

Maximum Operating Temperature: 113 Degrees F (45 Degrees C)

Operating pH Range: 3.0 – 10.0

Fits all standard 2” x 12” RO membrane housings.

RO UV Membrane CSM 80GPD + Membrane Housing + FR 450 ML + Taflone Tape + Elbow Connector suited for all type of Domestic RO UV Water Purifier