Combo OF OTG Adapter, USB LED Light And Type C Charging Connector (Assorted Colors)

Description

Type C connector

USB Type-C is a specification for a reversible-plug connector for USB devices and USB cabling. It was published by the USB Implementers Forum. Developed at roughly the same time as the USB 3.1 specification, but distinct from it, the USB Type-C Specification 1.0 defines a small reversible-plug connector for USB devices. Full-featured USB Type-C cables are active, electronically marked cables that contain a chip with an ID function based on the configuration data channel and vendor-defined messages (VDMs) from the USB Power Delivery 2.0 specification. USB Type-C devices also support power currents of 1.5 A and 3.0 A over the 5 V power bus in addition to baseline 900 mA; devices can either negotiate increased USB current through the configuration line, or they can support the full Power Delivery specification using both BMC-coded configuration line and legacy BFSK-coded VBUS line. Alternate Mode dedicates some of the physical wires in the Type-C cable for direct device-to-host transmission of alternate data protocols. The four high-speed lanes, two sideband pins, andâ??â??â??for dock, detachable device and permanent cable applications two USB 2.0 pins and one configuration pin can be used for Alternate Mode transmission. The modes are configured using VDMs through the configuration channel. A January 2013 press release from the USB group revealed plans to update USB 3.0 to 10 Gbit/s.[31] The group ended up creating a new USB version, USB 3.1, which was released on 31 July 2013,introducing a faster transfer mode called SuperSpeed USB 10 Gbit/s, putting it on par with a single first-generation Thunderbolt channel. The new mode's logo features a "Superspeed+" caption (stylized as SUPERSPEED+). The USB 3.1 standard increases the data signaling rate to 10 Gbit/s in the USB 3.1 Gen2 mode, double that of USB 3.0 (referred to as USB 3.1 Gen1) and reduces line encoding overhead to just 3% by changing the encoding scheme to 128b/132b.The first USB 3.1 implementation demonstrated transfer speeds of 7.2 Gbit/s. The USB 3.1 standard is backward compatible with USB 3.0 and USB 2.0. In 2015, USB 3.1 was renamed USB 3.1 Gen2 to differentiate it from USB 3.1 Gen1 (5Gbps, formerly USB 3.0). It initiated a new naming scheme where the data speed is referred to by Generation number.

OTG Adapter

This item is a Practical Micro USB to OTG Connect Kit for Mobile Phone. With it, you can connect your mobile phone with card reader, flash driver, mouse, keyboard, etc

Flexible USB Light

Laptop Desktop Computers Led Portable Lamp Can Be Easily Insert Into Usb Port To Have Quality Bright Light . Available In Multicolor Which Can Be Randomly Shipped

Sales Package 1 × Type c Adapter

              1 × OTG Adapter

              1 × Flexible USB Light